差别

这里会显示出您选择的修订版和当前版本之间的差别。

--- windows_核心安装 [2023/09/23 22:47] – admin
+++ windows_核心安装 [2023/09/23 23:04] (当前版本) – [Compiling the Source] admin
@@ 行 4: / 行 4: @@
 |本文是《安装指南》的一部分。您可以单独阅读它，也可以单击上一个链接以在步骤之间轻松移动。| |
 |[[安装要求|<< Step 1: 安装要求]]|[[服务器设置|Step 3: 服务器设置 >>]]|
-===== Required software =====
+===== 所需软件 =====
 ----
-See Requirements before you continue.
+在继续之前，请参阅[[安装要求]]
-===== Pulling & Compiling the source =====
+===== 拉取和编译源代码 =====
 ----
-==== Pulling the code ====
+==== 提取代码 ====
-Create the directory where the source files will be located. In this guide, we will use C:\Azerothcore.
-Open up Github Desktop
-Click File -> Clone repository... in the top left
-Click URL
-Fill in the data as follow:
+  - 创建源文件所在的目录。在本指南中，我们将使用 C:\Azerothcore.\\ \\
+  - 打开 Github Desktop\\ \\
+  - 在左上角依次点击 File -> Clone repository... \\ \\
+  - 点击 URL\\ \\
+  - 按如下方式填写数据：
+<code>
 Repository URL or GitHub username and repository: https://github.com/azerothcore/azerothcore-wotlk
 Local path: C:\Azerothcore
-Click Clone. Within a few minutes, Azerothcore's source files will be cloned into C:\Azerothcore.
+</code>
+点击 Clone. 几分钟后, Azerothcore 的源代码将被克隆到 C:\Azerothcore.
-==== Configuring and generating Visual C++ solution with CMake ====
+{{:github.pulling.code.png?direct&400|}}
+==== 使用 CMake 配置和生成 Visual C++ 解决方案 ====
-Before you begin, create a new directory called Build. In this guide, we will use C:\Build.
+在开始之前，请创建一个名为 Build 的新目录。在本指南中，我们将使用 C:\Build.
-Open CMake
+  - 打开 CMake\\ \\
+  - 点击 Browse Source... → 选择源代码所在的文件夹 (C:\Azerothcore)\\ \\
+  - 点击 Browse Build... → 选择构建目录 (C:\Build)\\ \\
+  - 点击 Configure.\\ \\
+  - In the dropdown menu, choose the version of the compiler you downloaded in the Requirements section. Be sure to choose the Win64 version if you work on a 64-bit compilation.\\ \\
+  - Make sure that Use default native compilers is checked.\\ \\
+  - Click Finish.\\ \\
+  - Make sure TOOLS_BUILD is set to all. This will compile the extractors needed later in the setup.\\ \\
+  - Click Configure again. As long as you have error(s) typed in red in the log window you will need to check your parameters and re-run it.\\ \\
+  - Click Generate. This will install the selected build files into your C:\Build folder.
-Click Browse Source... → Select the source directory (C:\Azerothcore)
+**Some error fixes**
-Click Browse Build... → Select the build directory (C:\Build)
-Click Configure.
-In the dropdown menu, choose the version of the compiler you downloaded in the Requirements section. Be sure to choose the Win64 version if you work on a 64-bit compilation.
-Make sure that Use default native compilers is checked.
-Click Finish.
-Make sure TOOLS_BUILD is set to all. This will compile the extractors needed later in the setup.
-Click Configure again. As long as you have error(s) typed in red in the log window you will need to check your parameters and re-run it.
-Click Generate. This will install the selected build files into your C:\Build folder.
-Some error fixes
 If you were to encounter errors in CMake see Common Errors.
@@ 行 75: / 行 65: @@
 When the build is complete you will find a message in the output that looks similar to this:
+<code>
 ========== Build: 22 succeeded, 0 failed, 0 up-to-date, 1 skipped ==========
+</code>
 You will find your freshly compiled binaries in the C:\Build\bin\RelWithDebInfo or C:\Build\bin\Debug folder. These are all used to run your server at the end of this instruction.
 You will need the following files in order for the core to function properly:
+<code>
 \configs\
 authserver.exe
@@ 行 98: / 行 90: @@
 libcrypto-3.dll / libcrypto-3-x64.dll
 libssl-3.dll / libssl-3-x64.dll
+</code>
 In the configs folder you should find:
+<code>
 authserver.conf.dist
 worldserver.conf.dist
+</code>
 There are two/three DLL files that need to be manually added to this folder, and you need to copy them from the following installation/bin directories: